How to fold, unfold and clean our boxes.

Folding our Cake Box

A step by step video on the assembly of our Cake Box.

Folding our Cupcake Box

A step by step video on how to assemble our Cupcake Box.

Folding our Macaron Box

A step by step video on the assembly of our Macaron Box.

How NOT to unfold the Cake Box

A short video on how NOT to unfold our Cake Box.

The lugs on the inside of your Cake Box are secured tightly to keep your cake safe and inside at all times. When you unfold your Cake Box for easy cleaning and (flat) storage, you need to carefully unhook the lugs as demonstrated in this video.

How to secure the grip handle

This video shows you how to secure the grip handle of your Cake Box. The hooking mechanism on the inside of your Cake Box ensures safe transportation of your precious creations.

How to secure the front of Boxes with a false bottom

This short video shows you how to secure the front of your Cake Box with false bottom. Some of the overlapping pieces on the front might seem redundant at first but they need to stay where they are and should be folded and clicked in place correctly so they actually strengthen your Cake Box to carry even your weightiest creations!

This method also applies to securing the front of your Oblong Cake Box, BBQ Box and Cupcake Box.

Assembly

Do check out the instruction videos above!

Clean the box with a soft cleanser before first use. (see maintenance)

Unfold the box,
the convex side of the logo is the outside of the box.

First fold all sides to the inside,
then fold the closing lugs to the inside

then fold the cams, in bottom, to the inside

turn up the backside of the box, use your arm for supporting,

close the closing lugs at the backside; first place the bottom-side of the lug in the slot, after that click-in the top.

Fold the lid 1x to the outside, than close the lugs from the frontpanel; first place the bottom-side of the lug in the slot, after that click-in the top.

To open the box; slightly press the closing lugs downwards and first take out the topside, after that take out the lower side.


Assembling the grip handle

put both ends of the grip-handle, from the outside, through the lid

hook the two lugs in each other

pull out both ends of the grip until the crease lines hit the lid.

Load-carrying capacity: 4 kg.


Unfolding

when unfolding the box, b.e. for maintenance, carefully take out the closing lugs, first the top-side and after that the bottom-side. Don’t pull the lugs, but push them out, using your thumb.

 

Maintenance

Remove loose parts.

Unfold the box. Wash in warm soapy water, rinse and dry with a soft cloth.